
CNC Setup Time Reduction: A SMED Walkthrough for Job Shops
In a high-mix shop, setups eat the capacity the schedule thinks it has. This walkthrough applies SMED to CNC changeovers and shows how recovered setup hours change what you can promise.
Tag
Articles tagged across the MachineScheduler.com blog.

In a high-mix shop, setups eat the capacity the schedule thinks it has. This walkthrough applies SMED to CNC changeovers and shows how recovered setup hours change what you can promise.

Preventive maintenance that lives on a separate calendar collides with the production schedule. This guide shows how to book PM as a capacity block th…

Ohio's dense job shop ecosystem puts a lot of CNC machining centers within miles of each other — and most of them are scheduling around the same certi…

At a 3-axis/5-axis machining center, the schedule's real bottleneck is often the certified operator, not the machine. Here's how to plan around it.

A machine being free isn't the same as a job being schedulable — not if the only certified operator is already committed elsewhere. Here's how to catc…

If you know a machine's hourly rate and current utilization, you can calculate the dollar value of closing the gap — here's the arithmetic, shown in f…

A practical checklist for evaluating machine shop scheduling software, built around the two things Excel structurally can't do: finite capacity and op…